Brix & Paulsen Motorsailor

AnneMarie was originally built in Germany as a fishing trawler. In 1984 the current owner purchased her and completed a full restoration and conversion into a sea going Bermuda rigged cutter motor sailor.

AnneMarie measure's 65' LOA to the tip of her bow spirit and 49' on deck. She is @30 tons displacement and draws approximately 7'.

She is built of 3" thick oak planks on oak frames. Her tanbark sails include a mainsail, foresail, jib & flyer. 

She is powered by a 225hp Mercedes Benz diesel and also has a bow thruster and an 8Kw generator; 24v/220v electrical system. She carries 875 US gallons of fuel with fuel consumption of 3GPH at 8Kn. She holds 275 US gallons of fresh water. 

Her equipment list is extensive including radar, autopilot, GPS plotter, VHF, depth sounder and more. 

This is a high quality rugged motor sailor built for trans Atlantic crossings and adventures on the sea.

Please review the photos and contact us for viewings & additional information. 

Hull is constructed of oak on oak; style is heavy in nature(3" planks). A substantial hull fender is built into the entire length for wharfage. Mahogany rails. Deck, cabin tops are teak.

Layout of the deck includes pedestal steering aft with a semi circle of storage boxes/seating finished bright. Forward of this steering station is a raised pilothouse with lower fore cabin.

The stem & bow spirit are anchored with deck supports and stainless steel stays.

All deck hardware is stainless steel.

Features: