Sail
1,933,032 $
Nautor
SWAN 82 RS-007 (Raised Saloon) 2004. Superb example of Nautor built performance cruising Swan with 4 dbl Staterooms all ensuite plus crew forward. Major refit 2011 including repaint. Excellent value and US DUTY Paid / EU VAT Paid! MAIN CHARACTERISTICS Name: CLEVELANDER Swan 82RS-007 (ex. ATLANTICA) BROKERS COMENTS The Swan 82 Raised Saloon is a very successful Nautor built Swan semi-custom series. CLEVELANDER is hull number 04 of this series and one of the most expensively built and detailed of the series. NAUTOR has been building Swans for over almost 50 years and a leader in composite performance high quality sailing yachts. CLEVELANDER is a Raised Saloon version of the Swan 82 Model allowing comfortable climate controlled cruising while offering unrivalled sailing performance coupled with spacious and refined accommodation for both the Owner and guests. In 2011-12 the owner invested in a comprehensive refit improving many of the yacht’s systems and décor. The interior layout was changed to the current owner’s requirements which are the original design layout for the Swan 82 series. This done with Nautor’s assistance and wood selections. CLEVELANDER’s interior condition is therefore more consistent with a 3 year old Swan. CLEVELANDER is designed to be operated by a small crew and fitted with the following equipment allowing her to be simple to sail while ensuring performance cruising : CLEVELANDER has an exceptionally voluminous and ingeniously designed layout that belies her 82’ LOA and is ideally suited for 3 – 4 couples plus crew. Ideal layout for charter if required. CLEVELANDER is currently fully MCA coded. HULL TRANSOM KEEL RUDDER STEERING THROUGH HULL FITTINGS DECK WOODWORK ON DECK 65mm wider teak planks in lieu of standard – deck lightly sanded in 2010 and 2012. WINCHES CHAIN PLATES FITTINGS FOR RUNNING RIGGING OTHER DECK FITTINGS 2 x fold up seats on pushpit All bead blasted Stainless Steel deck fittings for Matt finish HATCHES AND WINDOWS Additional hatch over Owners cabin in cockpit floor INTERIOR Clevelander has a custom interior finish. The Nautor teak has been treated with a white tint to give a “limed” teak finish which gives the interior a very light and bright feel. The quality and finish is quite superb and in incredible condition which really shows the quality of the Nautor craftsmanship. Drawers under bed Single pullman berth above Large centerline berth and dressing table. Overhead hatches and TV screen pivoting down from ceiling. Clevelander has a smaller sofa stbd saloon and no coffee table. She also has a dressing table in the owner\'s cabin on the port side with a sofa only on stbd side. ENGINE AND HYDRAULICS Foot operated bow thruster controls PLUMBING VENTILATION Additional extractor in saloon for electronics and charges/inverters HEATING AIR CONDITIONING ELECTICAL Separate radio battery 2 x Mastervolt 2,500 watt Inverters NAVIGATION AND COMMUNICATIONS ELECTRONICS MAST AND RIGGING Jib halyard DSK90 (2012) SAILS EQUIPMENT Second bow fitting for anchor on bow 2 x sun awnings, one new 2010. Bimini over center cockpit (2012) All interior soft furnishings except mattresses replaced in 2010. Crew covers for saloon upholstery Safe Comprehensive list of spares – inventory available on request from skipper. Custom carbon tender REFIT 2011/2012 refit includes the following 1)Modification to assist the anchor deployment arm 2) Main engine and generator thoroughly overhauled, injectors, injector pump, alternator, belts, coolant, mounts etc 3) Watermaker service and new piping and LP pump 4) Autopilot service 5) New steering cables 6) New heater exhaust 7) Hydraulics new oil and filters 8) Anchor re-galvanised and new chain 9) New plotters and HD radar all from Raymarine with wi fi capability 10) Floorboards all revarnished 11) Tables revarnished 12) Maxprop service 13) bowthruster serviced, new oil, gasket, repainted 14) New fans in forced air vent system 15) New underwater lights 16) Additional washdown facility in cockpit 17) Bimini for centre cockpit 18) New jib halyard (high modulus Dyneema) 19) MCA inspection items (liferafts, lifejackets, flares, fire extinguishers, medical kit) all up to date 20) New antifouling 2 coats REMARKS CLEVELANDER is a customized NAUTOR built Swan 82 Raised Saloon that has been exceptionally well equipped and maintained. She was built using Nautor’s solid composite monolithic hull layup and carbon fiber deck resulting in a stiff, strong and fast yacht that is capable of world cruising in comfort and safety. Additionally buying a SWAN is a solid investment with good company service and resale value down the road. CLEVELANDER is a superb value and worthy of a close inspection. NOT INCLUDED IN SALE Personal effects, including, personal tools, navigation equipment, cutlery, crockery, glassware, pictures and works of art. DISCLAIMER All speeds, measurements, capacities, consumptions, etc. may be approximate or estimated. Specifications provided for information only. Data was obtained from sources believed to be reliable and is not guaranteed by owner or brokers. Buyer assumes the responsibility to ascertain the correctness of all data contained herein and otherwise provided and must instruct his agent and surveyors to confirm all details for accuracy prior to purchase. Subject to prior sale price and inventory change or withdrawal from market without notice.Video: http://vimeo.com/93248890
LOA: 81.66 ft 24.89m
Ballast: 31500 lb 14,300 kgs
Displacement: 83800 lb 38,000 kgs approx
Naval Architecture: German Frers
Power
Engine Make: Cummins
Engine Model: 6BT5.9 220HP
Dimensions
Length at Waterline: 69.75 ft 21.26mBeam: 19.22 ft 5.86mMax Draft: 13.19 ft 4.02m
Flag & Classification UK & MCA commercial Small Ship Compliance
Taxes Paid EU VAT Paid / US Custom’s Duty paid –
Solid single skin fiberglass construction using a glass/aramid hybrid fibre reinforced vinylester laminate with local carbon fibre reinforcements. A large proportion of the fibres are unidirectional giving a stiff laminate with excellent strength and fatigue properties.
Structural bulkheads are of Nomex honeycomb cored carbon fibre epoxy prepreg construction and laminated to the hull and deck
Stiffener flanges are unidirectional carbon layups over foam cores
Engine beds are of GRP with steel inserts
Underwater lights in stern (2012)
Awlgrip flag blue (2010)
Hydraulically operated fold down transom forms a swim platform and gives access to the lazerette
Watertight bulkhead separates interior from transom
Room in the lazerette for a folded inflatable and outboard engine
Separate locker for LPG tank in locker on foredeck with stowage for four tanks
Hot and cold pressure water deck shower
\"L\" shaped keel with lead with antimony ballast bulb attached to a steel fin
High tensile, stainless steel bolts
Foam filled carbon fibre and epoxy skins with tubular carbon fibre stock, supported by two self aligning roller bearings
Weed deflector in front of rudder
Dual steering gear
Sheaves provided with guards to prevent jamming
Lightweight aluminum steering quadrant bolted to rudder stock
2 x 47\" destroyer type composite wheels with 4.0 turns HO to HO
Pedestals with roller bearings and friction break
Emergency tiller stored in lazarette
Bronze seacocks for all through hull connections below the waterline, closing flush with the outside and located in accessible positions, serviced (2010)
Main deck is of carbon fibre pre-preg sandwich construction with Nomex honeycomb core and glued to the hull
High density core under deck fittings
Coach roof, deckhouse and cockpits of glassfibre reinforced vinylester with low density foam core
Laid teak 9mm nominal thickness on side and bridge deck, deckhouse top and cockpit soles and seats, glued and vacuum bagged without screws
Low toe rail inside composite bulwark
2 x Harken 1111.3 STAE electric 3 speed, aluminum anodised drum primary winches at cockpit with carbon top
2 x Harken 980.3 STAE electric 3 speed, aluminum anodised drum secondary winches at cockpit
2 x Harken 980.3 STAE electric 3 speed, aluminum anodised drum utility winches at mast
Captive Main Halyard Winch
Each Harken winch has two foot switches on deck for two speeds
1 x Joy stick controlled Rondal hydraulic captive winch for mainsheet in lazerette
Recessed hydraulic windlass , Lewmar 3000 with chain gypsy and rode capstan. Hand held remote control
Sanguineti 2000W 24 volt recessing capstan drum at bow with each direction remote control foot switches, serviced (2012)
Carbon fibre chain plates bonded to the hull and to reinforced structural bulkhead. Recessed stainless steel chain plates for backstay and headstay bonded to hull structure.
Harken deck blocks with custom finish to match matt finish deck stainless
Roller bearing lead blocks for halyards at mast partners
Stainless steel jib sheet tracks with Harken cars
Foot blocks for jib sheets
Outboard sheet points
Fittings for gennecker and trysail sheets and runner blocks
Main sheet deck lead
Screw in fittings for MPS tack block on stemhead which is also used for locking the anchor arm in working position
4 x pair pop up mooring fairleads, fwd, mid and aft
3 x pair recessed mooring cleats, fwd mid and aft
Stainless steel bow rail, open stern rail and stanchions 740mm high
Above conform to ORC spacing requirements and finished in matt not polished stainless
1 x 19 stainless steel lifelines
Lifeline gates port and starboard mid ships
Socket for flag pole on stern rail
Stowage for 2 x 8 man life raft serviced annually for MCA requirement
5 x Spinlock clutches on deck at mast base
Hinged hatch on foredeck at bow to deck stowage and anchor windlass
Additional deck prisms
Flush fitting sail hatch and openable deck hatches of composite construction
Goiot opening ports with new Plexiglass (2010)
Raised saloon deck house fixed windows of tinted glass
Main companionway lockable sliding hatch of tinted acrylic with sliding drop board
2 x hinged GRP/teak hatches to lazarette
GENERAL ARRANGEMENT
All joinery work is done in accordance with the best yacht practice using first grade materials.
The grain of the teak veneer on the furniture and on the floor boards has been filled with white tint and then the teak is finished with a hand rubbed satin finish.
The teak laid floorboards are foam cored for lightness and provide access to the bilges and engine room via sound proofing membrane.
Hull topsides, where visible, are lined with teak battens in crew mess and white painted panels in guest accomodation. Overheads and inside of raised saloon coachroof coamings lined with removable panelling covered in an off white material.
All hatches have roller blinds and mosquito screens.
All the interior furniture, where possible has rounded corners. Doors, partitions and panelling are cored where possible to save weight and increase sound proofing. Self engaging latches with bumpers are fitted to hold doors in open position. Drawers are secured with latches. The doors are also fitted with sliding panels which seal the gap at the bottom of the door when in closed position to improve air conditioning effeciency.
CREW QUARTERS
Crew head and shower in the bow.
Aft of the crew head are two crew bunk beds on the port side.
The crew mess with settee and table is to starboard with lockers and hanging locker outboard and aft.
GALLEYLocated on stb forward side and aft of the crew area.
Appliances are generally outboard with large volumes of storage space.
Double stainless steel sinks inboard with more storage.Alpes Inox 4 burner propane stove with oven
Alpes Inox extractor fan with light
Miele 720 microwave
Miele G 643 SCVI dish washer
2 x front loading refrigerators powered via 230volt AC
Top loading freezer with custom stainless steel baskets
Washer and dryer
Corian white counter tops
Espresso machine
Icemaker (2010)
Coffee maker
GUEST/CAPTAIN\'s CABIN
Located opposite the galley and accessed from the forward end of the main saloon. Ensuite head and shower forward. Double bed with hanging locker.
MAIN SALOON
Incredibly light and spacious with almost a 270 degree visibility of the horizon from the main saloon looking out through the raised saloon windows. Large \"U\" shaped dinette to port with wrap around settee outboard and two single chairs inboard. Opposite to starboard is a settee followed aft by the ice maker/bar area and then the navigation station. Up steps midships to deck level or down steps offset to starboard to the guest accommodations.
STARBOARD GUEST CABIN
Located at the base of the stairs to the main saloon.
Ensuite head and shower forward.
Two single beds.
Hanging locker, storage lockers above and drawers under bed
PORT GUEST CABIN
Located aft of the main saloon, mirror image of starboard guest cabin
Ensuite head and shower aft.
Two single beds.
Hanging locker, storage lockers above and drawers under bed
MASTER CABIN
Located in the stern of the yacht.
Ensuite head with stall shower on the port side forward.
Four hanging lockers and ample other storage.
ENGINE
Cummins 6BT5.9-M 6 cylinder marine diesel (approx 5,500 Hours March 2014) rated at 190 HP @ 2200 rpm
Engine controls on starboard side
ZF Marine ZF63A reverse, reduction gear, ratio 2.68:1
Two stage super silencing system with with fibreglass silencer and gas and water separators for main engine and diesel generator
Cooling water is discharged below the waterline and exhaust gases discharged near the transom
Separate heat exchanger off the engine for consumable hot water system
3 x stainless steel fuel tanks with total capacity of 534 US gallons
Deck fuel fillers port and starboard
Fuel manifold with fuel return line for each tank
Dual Separ SWK2000/5UK fuel filter and water separator with water in fuel line alarm
Single Separ SWK 2000/5UK for diesel generator
Fuel tanks are vented to deck edge
Propellor shaft made of high tensile corrosion resistant steel with flexible shaft coupling
Shaft supported by rubber bearing at stern tube and strut
Max prop three blade feathering propellor
Shaft bearings and Maxprop serviced (2010)
Captive main halyard winch in engine room and fuel valve chest
HYDRAULICS
Rexroth 24 volt power pack – 2 x DC motor system in engine room stb side (serviced 2012)
PTO off generator
Twin Navtec backstay cylinders
Navtec boom vang with in and out control buttons at pedestal (new seals 2012)
Navtec inner forestay adjuster with cylinder under deck
Navtec jib halyard cylinder operated via the Navtec panel for manual adjustment in the cockpit
Navtec three function single-gauge system 50 central control panel with two speed pump for backstay, jib halyard and inner forestay
Separate System 50 panel for boom vang
Hydraulic mast jack with spacer and removable manual pump
Single purchase hydraulic mainsheet adjustment with manual back-up
Recessed Reckmann hydraulic headsail furler RF90-3
Lewmar 3000 hydraulic anchor windlass with remote control at the bow
Hydraulic Max Power bow thruster with foot controls at starboard pedestal
Sea water hoses of reinforced PVC tubing, fresh water hoses of nylon and copper tubing
Fuel and water tanks are of welded stainless steel and provided with baffles, inspection covers, sounding plug and vent pipes
Separate shower sump tanks
FRESHWATER SYSTEM
Pressurized and heated water supplied via 2 stainless steel tanks (fwd/Aft)
Tank filler line from deck
Water tank level gauge
Tank vent pipe terminates at galley
Deck shower port side aft
Oras single lever mixing faucets for washbasins, galley sinks and showers
The consumable water can be heated either with engine cooling water or with a heating element working on AC
AC driven Sea Recovery Aqua Whisper 1200-2 water maker producing approx 1200 US gallons a day (fully serviced 2012)
SEA WATER SYSTEM
Electric deck wash/fire pump 13 US gallons per minute with fore and aft deck connections
DRAINAGE SYSTEM
Galley sinks drain through sea cocks
Wash basins and showers drain to sump
Sump tanks are emptied by electrical and manual Whale pump
5 x bilge pumps
2 x manual Whale Titan pumps
Chain locker/forepeak manual pump
Tecma fresh water flushing heads discharging to holding tanks
Forced ventilation into cabins with timer
Extractor blowers from galley
Engine room air extractors using 2 PAR blowers with thermostatic controls
Battery boxes ventilated
Eberspacher heating system integrated with air conditioning water circulation system
Condaria 12002, reverse cycle servicing all cabins
General
24 volt DC system with insulated return
Wires sized to minimise voltage drop
230 volt AC three wire system
DC SYSTEM
24 volt, 1200 Ah house battery capacity
24 volt, 135 Ah engine starting battery
12 volt, 135 Ah generator starting battery
Batteries located in ventilated GRP boxes
Main engine battery parellel switch
Voltage stabilser for sensitive electronics and lights
Navigation lights replaced with LED Lopolight (2010)
AC SYSTEM
Fed via either the generator, shore power cord or inverter
Earth fault protection switch for all AC power sources
Northern Lights 16KW generator (approx 12712 February 2014) with sound shield producing 230 volts at 50hz
230 volt, 50 amp and 110 volt, 50 amp shore power via a 6kVA transformer
AC polarity alarm at each shore power inlet
House batteries charged via 140 amp alternator on the main engine or via 2 battery chargers each with automatic regulation
Main engine start batteries are charged via a 55 amp hour alternator on the main engine
Generator start battery is charged via a 35 amp hour alternator off the generator engine and DC back up system
2 x Suunto compasses, 1 at each helm
B&G instruments
2 x 360 degree wind direction
2 x 45 degree magnified wind direction
1 x rudder angle indicator on pilot display
7 x Hercules 2000 displays
4 x 20/20 displays on mast
2 x 20/20 displays in cockpit
2 x Hercules autopilots
Raytheon Raynav RN300E GPS at navigation station with antenna on lower spreaders WAAS NMEA antenna on stern rail
Raymarine E95 touchscreen plotter / radar at navigation station (new 2012)
2 Raymarine E7 touchscreen multifunction displays at each wheel (new 2012)
Raymarine HD colour radar antenna (new 2012)
Standard GX5500 VHF at navigation station with additional handset in cockpit
2 x Icom hand held VHFs with charging station
Furuno FS 1570, 150 watt, SSB with HF DSC distress alert
Furuno NX300 Navtex receiver
Panasonic PABX system
\"Mini M\" phone with data capability
Dell Opti PC (2010) with touchscreen display (2012)
HP printer/fax
WIFI antenna
Iridium Extreme mobile satellite handset
Mast removed from the boat and rigging checked (2010) including dye testing the standing rigging
Offshore Spars Carbon fractional rig
Standard modulus carbon
4 x sets of 18 degree aft swept spreaders
External track for full batten mainsail
Antal trysail track
Stainless steel rod standing rigging
Kevlar removable inner forestay to be used for staysail or storm jib
Leisure furl by Marten Marine hydraulic furling boom
Reckman RF90-3 N60 hydraulic furling headsail with twin grove foil
In and out foot switches for roller furler conveniently located next to the jib sheet winches
Single headsail halyard on centerline
Double spinnaker wing halyards (2010)
Staysail halyard (2010)
Mainsail halyard (2010)
Mainsheet Captive halyard Winch
Preventer
Checkstays (2010)
Vectran and Spectra sheets for headsail, spinnaker and mainsail (2010)
All North
Carbon Spectra inboom furling mainsail with full battens (2010)
Carbon Spectra roller furling jib (2010)
Gennaker on quick furl system new 2013
Carbon Spectra staysail (2010)
Storm trisail (2004)
Storm jib/staysail (2004)
14\' Pure carbon 4.5m RIB (2010)
40hp Yamaha outboard with tiller steering and electric start (2010)
Bose Lifestyle entertainment system with 2 zones
Samsung LED TV screen on “pop up” lift in main saloon
Sharp TV folds down from the headliner in the aft cabin
Bose 321 system in the aft cabin
FM and CD player in each sleeping cabin (not day office/kids cabin)
2 x 8 man Zodiac MCA approved life rafts (2009)
15 x automatically inflatable life jackets
Fixed fire system in the engine room with ventilation and fuel shut-offs operated from the companionway
2 x 406 EPIRBS ACR global fix and McMurdo E3
2 x 406 EPIRB Personal Locator Beacons (PLBs)
Dry powder fire extinguishers in each cabin
2 x inflatable danbouys
2 x liferings with throw line
1 x 64kgs CQR anchor on hinging carbon fibre, under deck, folding arm
110m, 13mm chain (2012)
1 x Danforth anchor
100m, 24mm plaited nylon rope
Selection of mooring lines
Air fenders
Multiplex, carbon fibre, 3.2m folding gangway with bridle that stows in a bag
Boarding ladder
Swimming ladder
Sunbrella covers for cockpit table, wheels and pedestal, main saloon table and settees
Cockpit cushions (2010)
Dodger over companionway
Most pumps rebuilt (2010)
Central vacuum system with two suction points below deck
Aqua Signal fog horn on mast
Remote control for swim platform to allow for operation off the boat
Features:
TypeSail
CategorySloop
MakeNautor
Year built2004
Length81.99ft
Hull MaterialComposite
Beam19.16ft
Draft13.16ft
Sleeping places8
New/UsedUsed
FuelDiesel