Circa Marine Fpb 115 Offshore Motor Vessel

The FPB 115 is an extraordinary Steve Dashew design, which will be built in New Zealand with fit out by Kelly Archer.

Dimensions and Capacities

LOD: 115.4’ / 35.2m

LWL: 111.5’ / 34m

Beam Deck: 21’ / 6.44m

Extreme Beam (edge of rub rails): 22.1 / 6.8m

Draft-half load: 5’ / 1.5m

Displacement Full Load: 84,000kg / 185,000lbs

Air Draft (top of masts-excluding whips): 36.5’ / 11.2m

Fuel Capacity: 6000 US Gallons / 22,700 L

Fresh Water Capacity: 2500 US Gallons / 9,400 L

Minimum Range of Positive Stability: 140 degrees (half fuel in one tank, full fresh water tanks)

Cruising Speed: 12 knots

Top Speed (Half Load): 14 knots

Approximate Range: 5000 NM @ 12 knots

Note: speeds/ranges are for smooth water, half load displacement, clean bottom

Main Engines: 2 x John Deere 6068SFM50 (265 HP at 2500 RPM)

Transmission: ZF305-2 – 2.91:1 reduction

Gensets: 27.5 kW 60Hz, 230VAC single phase x 2

Alternators: Electrodyne 150A, 28VDC belt driven off engine PTO with remote diodes, x 2 per engine – total of 4

Stabilizers: Oversized shafts, aluminum fins

Water makers: 2 x Sea Recovery 230V 75 GPH with auto fresh-water flush, soft-start, media filter

Fire Suppression: Fully automatic shut-down system in engine room w/ manual trigger

Ballast: An allowance for 4500kg / 10,000lbs lead ballast shall be made

Note: Full specification available on request.

Features: