Custom Classic Runabout

1958 Custom Classic Runabout Please contact the owner directly @ 208-342-4207 o jsebolt@mac.com...1958 SeaBolt This vintage one of a kind 14 foot runabout with a 64 inch beam was handcrafted in Pennsylvania in 1958 by a Master craftsman out of Straight Grain fir, Mahogany, Oak and Mahogany Marine plywood. Originally designed and built as the prototype for the start of a boat company, this boat was used on the Rivers and lakes around Western Pennsylvania and the Lakes of Upstate NewYork from 1958 through 1966. Rock solid construction with all Solid Oak Ribs and Battens and Solid Oak reinforced Chines. The Gunwales and deck Materials are solid Mahogany. Deck inlays are Solid straight grain fir. Mahogany Marine Grade 3/8" plywwod on the bottom of the hull and Mahogany Marine grade 1/4" Plywood for the sides of the hull. Entire Hull covered in Fiberglass. On the Solid Mahogany dash you have a steering wheel by Perko, a pull switch for the running lights to the right of the steering wheel and a pushbutton for the Airhorn at the center. The airhorn still has the original air cannister connected to it and it still works! There are snaps across the top of the windscreen to attach the leading edge of the included bimini top. The 1950's era Mercury Kiekhaefer Mark 55 Thunderbolt Four 40 HP Pull Start engine with steering and throttle connections is connected to the Quicksilver Throttle/Transmission control unit by Kiekhaefer with kill switch located at the drivers seat. It's fed by 2 Mercury portable/removable 6 gallon gas tanks under the decking at the stern accessible MarineClick: 243751

Features: