Hatteras 60My

Call for price!  Come see this boat at the 2014 Miami Boat Show!

The 60' Hatteras, with her 18'2" beam and 4'6" draft, provides more square footage than her competitors.  Like all Hatteras models, the 60MY features a solid fiberglass hull bottom that includes beefy support for key areas such as the tunnels, shaft log and strut locations.  Styling is enhanced by the fact that the hullside air intakes are hidden, providing clean lines and a salt free engine room.

The 135 sq. ft. aft deck is larger than those found on many larger motor yachts and has a large, curved settee that sits aft with a half moon table.  On either side of the lounge are stairwells leading to the swim platform.

The engine room has tremendous overhead clearance and good working space.  The side decks provide 13" walk around with bulwarks and stainless railing for good footing while underway.  On the bow deck there are storage lockers and centerline is a molded bench seat/sun pad.

On the flybridge twin helm chairs and a large L-shaped lounge give you a generous area to lounge comfortably.

The 3-panel glass salon stainless steel door allows you to stack the doors to the side, creating one living area.  The L-shaped sectional along with the club chair provides ease of conversation through to the galley or while watching the 37" TV situated in the aft port corner of the salon.  A single step up from the salon, the galley provides a 360 degree view of the water and is fully equipped with undercounter refrigeration, convection microwave oven and choice of stone countertops.  To starboard, a large L-shaped dinette provides plenty of seating and storage.

Down below, there are three staterooms with two heads.  Most impressive is the full beam master stateroom cabin with four large portlights allowing natural light into the room.  Your guests will be comfortable in either the bow stateroom with walk around queen berth or the criss/cross berths.

• Isophthalic gelcoat, exterior layer, white (all areas except hull)
• Blister resistant vinylester gelcoat, clear (hull)
• Hull and superstructure painted with a premium linear polyester/polyurethane coating for improved cosmetics & increased durability
• Polymer/copper based anti-fouling bottom paint
• Boot stripe, linear polyester/polyurethane coating
• Decks, non-skid surface, polyurethane paint with polymeric beads
• Solid fiberglass, resin-infused hull bottom with premium vinylester resins
• Hull sides of resin infused composite construction with PVC foam core and premium vinylester resins
• Solid fiberglass, resin-infused longitudinal stringers
• Steel resin infused into longitudinal stringers at key locations to create engine foundations
• Bulkheads, athwartships and interior decks of resin-infused composite construction using PVC foam core

Features: