Jeanneau 64

The NEW JEANNEAU 64

A close partnership between Philippe Briand and Andrew
Winch.

Philippe Briand has delivered a modern hull that incorporates a
hard chine for increased speed, stability, and interior volume.

Available for a delivery in Mediterranean, Spain 

The highest quality components, sourced from the leading suppliers, make up the standard deck equipment. Harken and Spinock equipment is used extensively. Exterior wood used in cockpit and on side decks is Teak.
FIXED STEMHEAD FITTING in 316 stainless steel with anchor roller
ATTACHMENT POINT for Code 0 or asymmetrical spinnaker on bow
ANCHOR WINDLASS 2300W/24v with a chainwheel for 14mm chain and a line drum mounted below deck
ANCHOR LOCKER with double access hatches from the deck and location for manual handle and bitter end attachment point.
OPEN BOW PULPIT in 316 stainless steel
DOUBLE LIFELINES in stainless steel Dyform wire, 75cm / 30” high
LIFELINE GATES located just aft of midships to either side
DECK-EDGE BULWARK in GRP runs from stem to stern
MOORING CLEATS in alumium
? 2 at the bow
? 2 forward quarter
? 2 midships
? 2 at the stern
RUB SRAKES in 316 stainless steel below each cleat location
MAST COLLAR (keel-stepped mast) in anodised aluminium
MAIN CHAINPLATES in 316 stainless steel at deck edge
LARGE, FLUSH DECK HATCH (70cm x 70cm / 27” x 27”) providing access to forward sail locker or optional skipper cabin. Hatch can be locked and has non-skid tape applied to surface.
FLUSH DECK HATCHES in foredeck
? 2 opening deck hatches (51cm x 51cm / 20” x 20”) in forward washroom(s)
? 4 opening deck hatches (51cm x 51cm / 20” x 20”) in forward cabin(s) with integrated ventilators
? 2 opening deck hatches (51cm x 51cm / 20” x 20”) in galley and chart table/lateral cabin
LATERAL COACHROOF WINDOWS drape-formed acrylic and bonded to deck.
FLUSH-MOUNTED DECK HATCHES on coachroof in main saloon
? 4 opening flush hatches (51cm x 51cm / 20” x 20”)
NO-SILL COMPANIONWAY
? Drop-down vertical hatch in acrylic with lock mechanism
? Sliding horizontal hatch in acrylic
? Deep well provides drainage for cockpit
HARKEN DECK ORGANISERS on each side
SPINLOCK LINE STOPPERS on cockpit coaming
FOLDING PADEYES on deck and deck edge
HARKEN BALL-BEARING TRACK, curved for self-tacking jib integrated into forward end of deckhouse
GRP ARCH over cockpit provides support for cockpit canvas and removes mainsheet from cockpit area.
2 STAND-UP BLOCKS on cockpit arch for mainsheet attachment
2 HARKEN 60 ELECTRIC “REWIND” SELF-TAILING COAMING-MOUNTED WINCHES
2 LINE STORAGE BAGS integrated into coaming with step
2 HARKEN 70.2 SELF-TAILING COAMING-MOUNTED WINCHES for genoa sheets
TEAK STEP integrated into coaming to facility access to side decks
STERN PUSHPIT in 316 stainless steel with fold-down ladder for access to transom and swim platform. Opening gate on port side to optional hydraulic gangway
FITTING FOR FLAG STAFF and flag staff

Features: